Andrews

298150

Andrews N4 Cam Set for Buell 00-02 Harley Davidson XL 00-10

Camshafts

Street/Drag, for stock or modified Evolution engines
Higher idle speed necessary
Stock springs and hydraulic lifters recommended
Intake Opening (degrees): 30
Intake Closing (degrees): 46

Cams Run to 6,500 Rpm With Stock Hydraulic Lifters; Recommend Solids Not Be Installed

Stock Base Circle Sizes Allow the Use of Stock Pushrods

N4 Cams Are for Stock or Modified Applications and Have a Slightly Higher Idle Speed, but Can Be Used With Stock Hydraulic Lifters and Springs; Rpm Range of 2,500-6,500

Designed to Fit 2000-2010 Harley Davidson XL and 2000-2002 Buell Models

Made in the USA

Sold in Pairs

INTAKE

Open (In Degrees): 30

Close (In Degrees): 46

Duration at .053 (In Degrees): 256

Duration at .020 (In Degrees): 296

Valve Lift: .490

Lift at TDC: .216

EXHAUST

Open (In Degrees): 52

Close (In Degrees): 24

Duration at .053 (In Degrees): 256

Duration at .020 (In Degrees): 296

Valve Lift: .490

Lift at TDC: .189

NOTE: It Is the Installer's Responsibility to Check Coil Bind and All Clearances

NOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.

Oxygen Sensor Nut Adapter Bung - Weld-in Plymouth Voyager 2.5L - Authentic Magnum
All Balls 25 1108 Wheel Bearing 25-1108
Mix me 1992