Camshafts Andrews 298165

Andrews

298165

Andrews N6 Cam Set for Buell 94-99 Harley Davidson XL 91-99

Camshafts


N6 designed for modified 1200s to 80in. and/or high compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500
Intake Opening (degrees): 34
Intake Closing (degrees): 50
Exhaust Opening (degrees): 56
Exhaust Closing (degrees): 28

  • Cams Run to 6,500 Rpm With Stock Hydraulic Lifters; Recommend Solids Not Be Installed
  • Stock Base Circle Sizes Allow the Use of Stock Pushrods
  • N6 Cams Are Designed for Modified 1200s to 80 And/or High Compression Pistons: Stock Springs and Hydraulic Lifters Recommended; Rpm Range 2,500-6,500
  • Designed to Fit 1991-1999 Harley Davidson XL and 1994-1999 Buell Models
  • Made in the USA
  • Sold in Pairs


  • INTAKE
  • Open (In Degrees): 34
  • Close (In Degrees): 50
  • Duration at .053 (In Degrees): 264
  • Duration at .020 (In Degrees): 302
  • Valve Lift: .500
  • Lift at TDC: .241


  • EXHAUST
  • Open (In Degrees): 56
  • Close (In Degrees): 28
  • Duration at .053 (In Degrees): 264
  • Duration at .020 (In Degrees): 302
  • Valve Lift: .500
  • Lift at TDC: .212


  • NOTE: It Is the Installer's Responsibility to Check Coil Bind and All Clearances
  • NOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.


  • Wilwood 340-4990 Remote Brake Bias Adjuster Cable
    FRAM CH10160 Full Flow Cartridge Filter
    Mix me 2739