Edelbrock

9629

Edelbrock 9629 Hardened Steel Pushrod - 16 per Pack

EAN: 0085347096299

UPC: 085347096299

Carburetors & Parts

Manufactured from a case hardened tubing with a surface hardening
It is a 5/16 (+0.100 longer than stock) pushrod
Overall inlet and outlet diameter is 7.9 long
Have ball ends, which are welded to guarantee maximum durability
Only moly lube or motor oil is preferred and is sold as a set of 16

The Edelbrock Hardened Steel Pushrod is designed for use in engines with or without hardened steel guide plates. These pushrods are manufactured from case hardened tubing with a surface hardening. It is a 5/16 (+0.100 longer than stock) pushrod. The overall inlet and outlet diameter is 7.9 long. It has ball ends, which are welded to guarantee maximum durability. The guideplate slots must be of the correct width for 5/16" pushrods. All parts should be lubed thoroughly upon installation. The preferred oil is moly lube or motor oil. It is sold as a set of 16.

Edelbrock 8550 Cylinder Hex Head Bolt Kit
Edelbrock 9300 Gasgacinch Gasket Sealer - 4 oz.
JEGS Performance Products 40210 8.0mm Red Hot Pow'r Wires
Stant 45358 SuperStat Thermostat - 180 Degrees Fahrenheit
Melling IS55E Oil Pump Driveshaft
CADILLAC Deville/DTS (Short Style) 00-10 Fender Trim Stainless Steel - 2nd Generation TFP CA-19 82201304150
2009 2011 Honda flywheel pressure 22300 RRC 003 15-007-85071-1-1-E15
Mix me 2958