Fram

FV380

FRAM FV380 Positive Crankcase Ventilation PCV Valve

EAN: 7262318488960

UPC: 009100003171

SKU: rm-FTA-FV380

PCV Valves

Critical component to emissions compliance testing
Helps to ensure that your vehicle meets emission standards
Regular maintenance helps to avoid poor engine performance, rough idling, and stalling
Designed to reduce air pressure inside the engine
Helps to contribute to a fuel-efficient and smooth running engine

PCV stands for Positive Crankcase Ventilation. The PCV valve was the first of the emission system components to be put into production vehicles. Critical to emissions compliance testing, FRAM PCV Valves can help to ensure that your vehicle meets the emission standards. Regular maintenance helps to avoid poor engine performance, rough idling, and stalling. To remove the PCV valve, just pull it out of the valve cover and pull off the hose. To test the PCV valve, start the engine, pull the valve out of the valve cover and put your thumb over the hole in the end. If you hear a little click, then the PCV valve is good. If there is no vacuum at the hole, either the valve is bad or the hose is bad. To see if the hose is bad, pull the hose off and put your thumb over the end. If there is vacuum, replace the PCV valve. If not, replace the hose. It is important to note that PCV valves are sized for specific engine applications. The wrong PCV valve for an application can flow too much or too little air causing drivability problems. Although the PCV valve is a simple device, it is designed to reduce the air pressure inside the engine and redirect it to the air intake system. Since the air is contaminated with oil, gasoline and engine metal residue, this in time will affect the operation of the valve assembly. The valve can plug up over time, which will result in a poor running engine that delivers less power and reduced fuel economy. It is a simple and inexpensive repair that will help contribute to a fuel-efficient and smooth running engine.

Beck Arnley 039-6428 PCV Valve Grommet
Dorman 917-214 Variable Valve Timing Solenoid
Dorman 917-211 Variable Valve Timing Solenoid
NGK (7783) TE65 Wire Set
Ishino Intake Plenum Gasket
CNC (Chuck Neal Corp.) 711-7/8 MASTER CYL. 7/8IN STEEL
REVTEK SUSPENSION
Mix me 4027