Main Bearings Clevite 77 MS1117P50MM

Clevite 77

MS1117P50MM

Clevite MS1117P50MM Main Bearing Set

EAN: 0027067549419

UPC: 027067549419

Main Bearings


UPC Code: 27067549419
Alternative Part Number (s): BBKSMS1117P50MM MS1117P50MM

Ford Clevite 77, Tri-Metal Main Bearing Set fits the following:121 CID 2.0L 4 cylinder 1983-1988,140 CID 2.3L SOHC Turbocharged 4 cylinder 1979-1989,140 CID 2.3L SOHC LPG 4 cylinder 1984-1985,140 CID 2.3L Special Vehicle Operation Turbocharged 4 cylinder 1984-1986,140 CID 2.3L SOHC 4 cylinder 1974-1997 NOTE: 1 Spark Plug Per Cylinder.Clevite Tri-Metal 77 Main Bearing Set combines the strength of a copper-lead alloy (Bi-Metal) layer with steel backing and an electro-plated Micro Babbitt metal as an overlay. Clevite Main Bearing Set part number: MS1117P50MM (0.50mm / 0.020in. Oversize)The steel backing on the Clevite Tri-Metal 77 Main Bearing Set provides strength and durability. The Bi-Metal Babbitt overlay provides the conformability and Load Capacity. The Third layer - Micro-Babbitt overlay provides the critical surface Embedability Conformability and has far more forgiveness than bi-metal. This ideal design has properties not found in many original equipment bearings. In most cases Clevite Tri-Metal 77 Bearings are an upgrade over a stock bearing, or three times better.It takes Three Layers to be Number One, and Clevite 77 Tri-Metal Bearings are it ! Engineering quality engine bearings involves a number of interdependent factors. Here is how Clevite 77s Tri-Metal cast copper lead material compares to bi-metal bearings on the most important of these factors:Seizure Resistance: Tri-Metal bearings have significantly greater seizure resistance than bi-metal bearings, by as much as 40%.Load Capacity: Tri-Metal bearings can withstand much higher loads for longer periods of time as compared to bi-metal bearings, over 60% higher loads.Embeddability Conformability: The overlay on a Tri-Metal bearing offers a far more forgiving surface than bi-metal bearings. This feature may not be as critical during OE assembly as it once was, but it does offer additional protection that can be extremel

2000 - 2002 DAEWOO NUBIRA Front and Rear Brake Rotors Centric C-tek OEM Aftermarket Replacement Direct Fit (Sold as Pairs)
Thunder Cycle Designs Pushrod Tubes TC-961
Mix me 477