Devcon

20445

Devcon 20445 Flow-Mix 5-Minute Epoxy - 14 ml

EAN: 0078143204456

UPC: 078143204456

Epoxy Adhesives

Two part, rapid curing, clear, general purpose epoxy; may be used as a metal filler and to restore rotten wood
Handling time: 5 minutes, Set time: 8-10 minutes, Cure time: 1 hour
Flow-Mix nozzles automatically mixes resin and hardener together; apply mixed epoxy directly to your repair
Temperature Range: -40 F to 200 F
Suggested Applications: Repair of autos, bikes, boats and much more; use on metal, wood, glass, ceramic, concrete, stone, china, fiberglass

Devcon Flow-Mix 5 Minute Epoxy is a two part, rapid curing, clear, general purpose epoxy. Better on rigid materials, this epoxy is useful for repairing cars, bikes, boats and more. May also be used as a metal filler and to restore rotten wood. The flow-mix nozzles automatically mixes the resin and hardener together. Apply the thoroughly mixed epoxy directly to your repair. For best results, pull plunger back slightly (1/8”) to allow air bubbles to rise to the top so that you do not push air bubbles into the Flow-Mix nozzle. To get an even flow of resin and hardener, push down evenly on the plunger. Bonds metal, wood, glass, ceramic, concrete, stone, china, and fiberglass with a tensile strength of 1,500 PSI. Water resistant, with a temperature range of -40 degrees Fahrenheit to 200 degrees Fahrenheit.