Comp Cams

8709-1

COMP Cams 8709-1 Hi-Tech 3/8 Diameter 10.200 Length Pushrod

EAN: 0036584425335

UPC: 036584425335

Push Rods

3/8 inch diameter; 10.200 inch length
One-piece construction from 0.080 inch wall, seamless chromemoly
Heat treated for extended durability and guide plate compatibility
Precision formed and reinforced ends
Black oxide finished with laser etched part number and length

The pushrod is one of the most important pieces of the valve train. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Hi-Tech Pushrods feature a one-piece design from 0.080 inch wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black oxide finished with length and part number laser etched on the OD for ease of identification.

3-1/2 ID Venair Silicone Coupling, 3 Long, 4 Ply Polyester, Blue
Honda Axle Bearing Carrier 400EX BC601R-01
Mix me 2739